All About Assessment Validation and How to Validate Assessments

All About Assessment Validation and How to Validate Assessments

Blog Article

Among the numerous obligations RTOs face post-registration—annual declarations, AVETMISS reporting, marketing compliance—validation is often the most dreaded.

We have numerous articles on validation, but let's go back to the term itself. ASQA defines validation as a quality review of the assessment process.

In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.

As stated in Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

The standards require RTOs to perform two types of validation.

The initial type of assessment validation ensures compliance with the training package assessment requirements within your RTO's scope.

The second validation type ensures that assessments adhere to the principles of assessment and rules of evidence.

This suggests we perform validation both before and after the assessment. This article will concentrate on the first type—assessment tool validation.

The Two Types of Assessment Validation Explained

Assessment Validation: What It Is

As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, often referred to as pre-assessment validation or verification, deals with ensuring all unit requirements are addressed as per the first part of the clause, ensuring complete workbook compliance.

On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.

This piece will highlight assessment tool validation.

Steps for Conducting Assessment Tool Validation

Having discussed the two types of validation, let’s delve into assessment tool validation.

When to Conduct Assessment Tool Validation

The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Thus, whenever new learning resources are purchased, you must conduct assessment tool validation before allowing student use.

There's no requirement to wait for your next 5-year cycle validation schedule. Validate new resources promptly to ensure they’re ready for students.

Nevertheless, this isn't the only occasion for this type of validation. Conduct assessment tool validation when you:

- you update your resources
- new training products are added by you on scope
- course is reviewed by you against training product updates
- learning resources are identified as a risk during the risk assessment

ASQA's risk-based approach to regulation necessitates regular risk assessments by RTOs. If there are student complaints about learning resources, it's an opportune time for assessment tool validation.

Which Training Products to Validate?

Keep in mind, this validation ensures that all learning resources comply before use. All RTOs must validate resources for each unit.

Necessary Resources for Assessment Tool Validation

Training Materials

Since you are validating your assessment tools, you will require the entire suite of your learning resources:

Mapping tool – start with this document. It illustrates which assessment items address unit requirements, making validation quicker.

Learner/student workbook – validate its suitability as an assessment tool. Confirm that instructions are clear and answer fields are sufficient. This is a common problem.

Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item are provided. Clear benchmarks are essential for reliable assessment outcomes.

Other related resources – these might include checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are appropriate for the assessment task and meet unit requirements.

Validation Team

Clause 1.11 describes the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs often require all trainers and assessors to be present, occasionally including industry experts.

As a whole, your validation panel must have:

Vocational competencies and industry skills relevant to the unit being validated

Current expertise and skills in vocational teaching and learning

Any one of these training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or the next version

Assessment validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool benefits both the validation process and documentation. It makes it easier to comprehend how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Simultaneously, it provides documentation that you have validated your resources before students use them.

While ASQA does not have a recommended or required template for assessment tool validation, many templates are available online. These tools generally require validators to review the tools as a whole to see if they meet the principles of assessment.

Principles of Assessment Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.

It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:

Element Performance Criteria Assessment Instructions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Inspect?

As mentioned in our blog post Common Problems In Assessment Tools, you need to ensure that your assessment tools allow trainers to follow assessment principles and evidence rules.

Assessment Basic Principles
Fairness – Are equal opportunities and access offered to everyone in the assessment process?

Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Is the assessment measuring what it is supposed to measure? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?

Evidence Rules

Validity – Does the evidence show the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there adequate evidence to ensure the learner has the required skills and knowledge?

Authenticity – Does the assessment tool confirm that the work is the candidate’s own?

Currency – Do the assessment tools reflect current units of competency and modern industry practices?

Although these are frequently covered in VET professional development and nationally recognised training, many tools still struggle to meet these requirements.

To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:

Demonstrate What You Teach

Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following at least here once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

diaper changing

prepare bottles, bottle feed infants, and clean equipment

prepare solid foods and feed babies

respond properly to infant signs and cues

prepare infants for sleep and soothe them

monitor and support age-appropriate physical exploration and gross motor skills

Getting students to describe changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Mind the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby won’t suffice.

All or Nothing

Mind the lists. In the previous example, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Give More Specificity

Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What details can be included in a work package?

Answers can include:

Required materials

Corresponding costs

Length of activities

Appointed duties and responsibilities

If an assessment item demands multiple answers, specify how many answers a student must provide. This ensures your assessment is reliable, and the evidence gathered is valid.

This is true for assessment items with double-barrelled questions or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:

Name a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.

Possible answers may include, but are not limited to:

Weather conditions – work area isolation, engineering, PPE

Work area and ground conditions – eliminating hazards, isolation, use of engineering controls

People – isolation, engineering controls, administration

Structural hazards – substituting, isolation, use of engineering controls

Chemical hazards – isolating, engineering controls, administration

Equipment or machinery – isolation, use of engineering controls, administrative controls

Avoiding double-barrelled questions simplifies responses for students and allows assessors to accurately judge student competence.

Given these requirements, you might think, “Don’t learning resource developers provide audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This impacts your compliance history, so it’s wiser to take the safe and compliant route.