Unlocking the Secrets of Assessment Validation: Validating Assessments

Unlocking the Secrets of Assessment Validation: Validating Assessments

Blog Article

After gaining registration, RTOs need to monitor several aspects including annual declarations, AVETMISS reporting, and marketing compliance, with validation being a major concern.

Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.

In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.

As stated in Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

The standards necessitate conducting two types of validation.

The primary validation type ensures compliance with the training package requirements for your RTO's assessments.

The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.

Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.

Understanding the Two Types of Assessment Validation

The Basics of Assessment Validation

As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.

In contrast, post-assessment validation focuses on the implementation, requiring Registered Training Organisations to conduct assessments according to the Principles of Assessment and Rules of Evidence.

Our focus here will be on assessment tool validation.

How to Properly Conduct Assessment Tool Validation

Understanding the two types of validation allows us to delve into the specifics of assessment tool validation.

Timing of Assessment Tool Validation

Assessment tool validation ensures that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Thus, whenever new learning resources are purchased, assessment tool validation should be conducted before students use them.

No need to wait for the next validation schedule in your 5-year cycle. Validate new resources immediately to ensure they’re suitable for students.

Still, this isn't the only reason for this type of validation. Conduct assessment tool validation when you:

- updating your resources
- new training products get added on scope
- course is reviewed against training product updates
- your risk assessment includes identifying your learning resources as a risk

ASQA's risk-based regulation approach requires RTOs to conduct regular risk assessments. Therefore, complaints from students about learning resources are a perfect time for assessment tool validation.

Determining Training Products for Validation

Do not forget, this validation ensures compliance of all learning resources before they are used. All RTOs must validate resources for each unit.

What Do You Need for Assessment Tool Validation?

Academic Resources

As you validate your assessment tools, you will need the complete set of your learning resources:

Mapping tool – begin with this document. It details which assessment items correspond to unit requirements, aiding faster validation.

Learner/student workbook – check its suitability as an assessment tool during validation. Ensure instructions are clear and answer fields are sufficient. This is a common issue.

Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item are provided. Clear benchmarks are essential for reliable assessment outcomes.

Other related resources – may consist of checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they suit the assessment task and address unit requirements.

Validation Team

Clause 1.11 describes the requirements for validation panel members, indicating that validation can be performed by one or more persons. RTOs often require all trainers and assessors to attend, and sometimes industry experts are invited.

Your validation panel, as a group, must possess:

Relevant vocational competencies and industry skills applicable to the unit being validated

Recent expertise and skills in vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or the successor version

Assessment validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool benefits both the validation process and documentation. It makes it easier to comprehend how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can act as evidence that you have validated your resources before they are used by students.

Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are accessible online. These tools typically have validators examine the tools in their entirety to determine if they meet the principles of assessment.

Assessment Principles Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.

A more detailed template is highly recommended for inspecting each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Assessment Instructions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Inspected?

As stated in our blog post Common Problems In Assessment Tools, you must ensure your assessment tools allow trainers to adhere to assessment principles and evidence rules.

Basic Principles of Assessment
Fairness – Are equal opportunities and access offered to everyone in the assessment process?

Flexibility – Are different options provided in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Is the assessment measuring what it is supposed to measure? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment achieve the same results every time, regardless of who conducts the training? Will different assessors consistently make decisions on skill competence?

Core Rules of Evidence

Validity – Does the evidence demonstrate that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool confirm that the work is the candidate’s own?

Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?

Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.

To prevent using learning resources that overlook some unit requirements, make sure to follow these guidelines:

Practice What You Preach

Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

nappy change

bottle preparation, bottle-feeding babies, and cleaning equipment

prepare solid food and feed infants

respond to infant signs and cues appropriately

prepare infants for sleep and soothe them

monitor and encourage age-appropriate physical exploration and gross motor skills

Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once click here with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.

All or Not Competent

Pay attention to lists. Again, as illustrated above, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity

Each assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions are not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?

The answer might include:

Essential resources

Applicable costs

Time required for activities

Appointed roles and responsibilities

If an assessment item calls for several answers, specify the number of answers needed from a student. This ensures your assessment is reliable, and the evidence gathered is valid.

The same applies to assessment items with double-barrelled questions or those that ask for multiple answers simultaneously. Such questions can confuse both students and assessors, as illustrated in the example below:

Identify a hazard and/or environmental issue in the work area and select the most effective hazard control hierarchy.

Possible answers include, but are not limited to:

Weather conditions – work area isolation, engineering controls, personal protective equipment

Work area and ground conditions – elimination, isolating, engineering controls

People – isolating, use of engineering controls, administration

Structural hazards – substitution, isolation, use of engineering controls

Chemical hazards – isolating, use of engineering controls, administration

Equipment or machinery – isolation, engineering, administrative controls

Avoiding double-barrelled questions makes it simpler for students to answer and for assessors to accurately judge student competence.

Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” But such guarantees mean you must wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s wiser to take the safe and compliant route.